Class 5 Gravel Delivery in Minnesota
Minnesota Aggregates delivers clean, MnDOT-specification Class 5 gravel to job sites across the Twin Cities metro and greater Minnesota — on schedule and ready to compact.
Class 5 is the industry-standard road base aggregate: a crushed limestone blend engineered to lock together under compaction and create a stable, load-bearing foundation. Whether you’re a general contractor pouring footings over a prepared sub-base, a landscaping crew building out a residential driveway, or a homeowner adding a parking pad, we deliver the right material in the right quantity on your timeline.
Owned and operated by Wyatt Dooley — who grew up sourcing, hauling, and delivering aggregate across Minnesota — this isn’t a side hustle with a rented truck.
We run our own fleet, control material quality at the source, and offer professional skid steer spreading so your material arrives and gets placed in one visit.
Class 5 Gravel Delivery in Minnesota
Minnesota Aggregates delivers clean, MnDOT-specification Class 5 gravel to job sites across the Twin Cities metro and greater Minnesota — on schedule and ready to compact.
Class 5 is the industry-standard road base aggregate: a crushed limestone blend engineered to lock together under compaction and create a stable, load-bearing foundation. Whether you’re a general contractor pouring footings over a prepared sub-base, a landscaping crew building out a residential driveway, or a homeowner adding a parking pad, we deliver the right material in the right quantity on your timeline.
Owned and operated by Wyatt Dooley — who grew up sourcing, hauling, and delivering aggregate across Minnesota — this isn’t a side hustle with a rented truck. We run our own fleet, control material quality at the source, and offer professional skid steer spreading so your material arrives and gets placed in one visit.
Class 5 Gravel Specifications & Properties
Class 5 is a graded aggregate base defined by the Minnesota Department of Transportation (MnDOT) under Specification 3138. It consists of crushed limestone particles ranging from ¾-inch stone down to fine dust, blended at specific ratios so the material self-binds under compaction.
Technical Specifications
| Property | Class 5 Standard |
|---|---|
| Maximum Aggregate Size | ¾ inch (19 mm) |
| Composition | Crushed limestone with graded fines |
| Compaction Behavior | Self-binding under mechanical compaction |
| Drainage | Good — allows water percolation while maintaining stability |
| Weight | Approximately 1.4 tons per cubic yard |
| MnDOT Specification | Spec 3138, Graded Aggregate Base |
What Makes Class 5 Different from Other Aggregates
The critical difference is the fines content — the small crusite dust and sand-sized particles mixed in with the larger stone. When you compact Class 5, those fines fill the gaps between larger rocks and lock everything into a rigid, interlocking matrix. This is why Class 5 holds up under vehicle traffic and equipment loads where decorative gravel, pea rock, or washed stone would rut and shift.
Class 5 vs. Class 1
Class 1 aggregate uses larger stone (up to 1.5 inches) and is designed primarily for drainage and sub-base layers deep in the road structure. Class 5 is the surface-ready base — it goes on top of Class 1 or directly on prepared subgrade. If you need one product for a driveway, parking pad, or road shoulder, Class 5 is almost always the right choice. Learn more in our full guide: Class 1 vs. Class 5 Gravel.
Class 5 vs. Recycled Asphalt Millings
We deliver both products. Recycled millings give a dark, blacktop-like appearance and soften slightly in heat, creating a semi-sealed surface. Class 5 stays firmer year-round and compacts more uniformly. Many contractors use Class 5 as the structural base and top with millings for appearance.
Delivery Sizes, Service Area & Spreading
How Much Do You Need?
| Load Size | Covers (at 4″ depth) | Typical Project |
|---|---|---|
| 3 – 5 cubic yards | 250 – 400 sq ft | Walkway base, small patch, utility backfill |
| 6 – 10 cubic yards | 500 – 800 sq ft | Single-car driveway, parking pad |
| 11 – 15 cubic yards | 900 – 1,200 sq ft | Double-wide driveway, small parking area |
| 16 – 22 cubic yards (full tandem) | 1,300 – 1,800 sq ft | Long driveway, commercial lot prep |
| Multiple loads | Unlimited | Road base, large commercial, phased projects |
Quick math: Length (ft) × Width (ft) × Depth (in) ÷ 324 = cubic yards needed. Or skip the math and use our Cubic Yardage Calculator.
Where We Deliver
We run deliveries daily throughout the greater Twin Cities metro and beyond:
- North Metro — Blaine, Coon Rapids, Andover, Anoka, Ramsey, Elk River
- East Metro — Woodbury, Stillwater, Oakdale, Cottage Grove, Lake Elmo
- West Metro — Plymouth, Minnetonka, Eden Prairie, Maple Grove, Wayzata
- South Metro — Burnsville, Eagan, Apple Valley, Lakeville, Prior Lake
- Greater Minnesota — Contact us for delivery availability and scheduling outside the metro
Professional Skid Steer Spreading
Don’t have a machine on site? Our skid steer services team can spread, grade, and compact your Class 5 after delivery — saving you from renting equipment and hiring a separate operator. One call, one visit, done.
Getting Class 5 Gravel Delivered Is Easy
Need Class 5 gravel delivered in Minnesota for a driveway, pad, or road base? Minnesota Aggregates delivers clean, compactable Class 5 (aggregate or recycled) to homeowners and contractors across the state. Tell us your location and estimated yardage, and we’ll help you schedule fast delivery and place the load where you need it, so you can build a stable base that compacts well and holds up over time. Not sure how much to order? Use our yardage calculator & we can confirm the estimate before delivery.
We make the process simple, so you can focus on your project—not the logistics. Just follow these three steps to get high-quality Class 5 delivered right where you need it.
Step 1:
Request a Quote
Call or fill out our quick online form to let us know how much Class 5 you need and your delivery location.
Step 2:
Schedule Your Delivery
We’ll work with your schedule to set a convenient delivery time that keeps your project on track.
Step 3:
Get Fast, Reliable Delivery
We show up on time with top-grade Class 5 gravel—ready for your base layer, driveway, or pad.
Why Choose Minnesota Aggregates for Class 5 Delivery?
Class 5 is a well-graded mix of rock and fines designed to compact into a firm base, which is why it’s a go-to for driveways, garage or shed pads, parking areas, and road base layers. When you order delivery, the material arrives ready to spread and compact. To keep delivery fast and smooth, make sure the dump area is clearly marked and can handle a loaded truck (firm ground, enough turning room, and no low wires or tight gates). Pricing and scheduling typically depend on yardage, delivery distance, and site access. If you want help placing and shaping the material for proper drainage and compaction, skid steer grading can be added so your base layer is even and ready for the next step of your project.
We deliver more than just gravel—we deliver confidence, convenience, and quality. Our team is committed to helping you finish your project on time and within budget.
Fast, On-Time Delivery
We stick to your schedule so your project stays on track with no delays.
High Quality Class 5 Material
Our Class 5 is clean, compactable, and ideal for driveways, pads, and foundations.
Equipment Support Available
Need help spreading the material? Our skid steer services are available to make your job even easier.
Local Service You Can Count On
As a Minnesota-based company, we know the area and what it takes to get the job done right.
Let’s Schedule Your Class 5 Delivery Today
Let’s get your Class 5 gravel delivered—fast, on time, and without the hassle. Whether you’re a contractor building a solid base or a homeowner upgrading your driveway, Minnesota Aggregates makes the process easy. With dependable service, high-quality Class 5 material, and local expertise, we’re here to help you build a strong foundation that lasts.
Contact us and we will get back to you asap!
We’re here to answer your questions, provide pricing, and schedule delivery on your timeline. Let’s get your project moving with fast, reliable service you can trust.
Frequently Asked Questions
What is Class 5 gravel used for?
Class 5 is used as a compactable base material for driveways, roads, parking lots, building pads, and utility backfill. It meets MnDOT Spec 3138 and is the standard aggregate base for both residential and commercial construction in Minnesota.
Is Class 5 gravel good for a driveway?
Yes — Class 5 is the most commonly recommended driveway base material in Minnesota. Its mix of crushed stone and fines compacts into a hard, stable surface that resists rutting and handles vehicle traffic year-round, including through freeze-thaw cycles.
How much Class 5 do I need for a driveway?
For a standard residential driveway (40 ft long × 12 ft wide × 4 inches deep), you need approximately 6 cubic yards. Use our Cubic Yardage Calculator for exact project estimates.
What is the difference between Class 1 and Class 5 gravel?
Class 1 contains larger stone (up to 1.5 inches) and is designed for deep sub-base and drainage layers. Class 5 uses smaller aggregate (¾-inch maximum) with more fines, making it the better choice for surface-level base that needs to compact tightly. For most driveway and pad projects, Class 5 is the right product. See our full comparison: Class 1 vs. Class 5 Gravel.
Can I use Class 5 as a finished driveway surface?
Yes. Many Minnesota homeowners use Class 5 as both the base and the driving surface. Once compacted, it forms a firm, clean gray surface. For a darker look, some customers top Class 5 with a thin layer of recycled asphalt millings.
How fast can you deliver?
Most orders are scheduled within 3 to 5 business days. During peak season (spring and summer), we recommend booking at least a week ahead. Contact us for current availability.
Do you offer spreading and grading?
Yes. Our skid steer services crew can spread, grade, and compact Class 5 on site. This is especially useful for homeowners who don’t have access to heavy equipment.
What does Class 5 gravel cost?
Pricing depends on quantity and delivery distance. We offer competitive per-yard rates with delivery included for the Twin Cities metro area. Request a free quote for your specific project.
Should I use Class 5 or sand as a paver base?
They serve different purposes. Class 5 is used as the structural base layer (4–6 inches deep) beneath pavers. Sand (typically concrete sand or mason sand) is the thin setting bed (1 inch) placed on top of the compacted Class 5. You need both. We deliver sand and Class 5.
What’s the difference between Class 5 and recycled Class 5?
Standard Class 5 is quarried and crushed from virgin limestone. Recycled Class 5 is made from reclaimed concrete and asphalt, crushed to the same gradation. Both compact well. Recycled Class 5 is generally more affordable. Ask us about availability.